User manual

32
VII-4. WPS Setup
If your wireless router/access point supports Wi-Fi Protected Setup (WPS)
then you can use this method to connect to a Wi-Fi network.
1. Press the WPS button (often the WPS/Reset button) on your router/access
point to activate WPS.
Please check the instructions for your wireless
router/access point for how long you need to hold
down its WPS button to activate WPS.
2. Within two minutes, press the WPS button on the
underside of the EW-7811UTC for 1 – 3 seconds
to activate its WPS.
3. The devices will establish a connection.
WPS Button