EW-7611ULB Quick Installation Guide 03-2021 / v1.
I. Product Information .............................................................................. 1 I-1. Package Contents ..................................................................................................................1 I-2. I-3. I-4. LED Status ..............................................................................................................................1 System Requirements .............................................................................................
Multi-Language Quick Installation Guide (QIG) on the CD Čeština: Českého průvodce rychlou instalací naleznete na přiloženém CD s ovladači Deutsch: Finden Sie bitte das deutsche S.A.L. beiliegend in der Treiber CD Españ ol: Incluido en el CD el G.R.I. en Español. Français: Veuillez trouver l’français G.I.R ci-joint dans le CD Italiano: Incluso nel CD il Q.I.G. in Italiano. Magyar: A magyar telepítési útmutató megtalálható a mellékelt CD-n Nederlands: De nederlandse Q.I.G.
I. Product Information I-1. Package Contents I-2. LED Status LED WLAN LED Status On Off Description Wireless activity: transmitting or receiving data. No wireless activity. I-3. System Requirements - Windows 7 - 10, Mac OS X 10.7 – 10.11 USB 2.
I-4. Safety In order to ensure the safe operation of the device and its users, please read and act in accordance with the following safety instructions. 1. The wireless adapter is designed for indoor use only; do not place the wireless adapter outdoors. 2. Do not place the wireless adapter in or near hot/humid places, such as a kitchen or bathroom. 3. The wireless adapter contains small parts which are a danger to small children under 3 years old.
II. Installation 1. Switch on your computer and insert the USB adapter into an available USB port of your computer. Never use force to insert the USB adapter. 2. Insert the included CD-ROM into the CD drive of your computer. The setup wizard is also available for download from the Edimax website. 3. For Windows users the setup wizard will open. For Mac users the CD’s “Mac” folder will open.
III. Windows III-1. Driver Installation If the CD didn’t auto-run, please open the “Autorun.exe” file to start the setup wizard. 1. Click the EW-7611ULB wireless USB adapter to continue. 2. Click “Install Wi-Fi Driver” to install the Wi-Fi drivers.
3. Click “Next” to continue and follow the instructions on-screen until installation is complete. 4. You need to install the Bluetooth drivers next, so select restart your computer later and click “Finish”.
5. 6. Click “Install Bluetooth Driver” to install the Bluetooth drivers. Click “Next” to continue and follow the instructions on-screen until installation is complete.
7. 8. You need to restart your computer before using the adapter. Choose whether to restart now or later and click “Finish” to continue. Click “Exit” to close the setup wizard. The multi-language QIG is also included on the CD-ROM. To open it click “Multi-language QIG”. 9. Please disable any other wireless adapters as described in V. Disabling Network Adapters. Then, Windows users can connect to an available Wi-Fi network or Bluetooth device as usual. For guidance on doing so, please refer to VI.
III-2. Driver Uninstallation To uninstall drivers for your adapter, use the Windows Control Panel built-in Programs and Features, Uninstall a Program or Add or Remove Programs feature. An example is shown below: 1. Open Control Panel using the Start menu or Search function. 2. Select Uninstall a program under the Programs category. 3. Select Edimax Wi-Fi N150 (or similar) and Edimax Bluetooh 4.0 (or similar) and click Uninstall.
IV. Mac OS IV-1. Driver Installation Bluetooth connectivity is Windows only. 1. 2. 3. Open the “RTLWLANU_MacOS..” folder and double click the “Installer.pkg” file to open the driver installation wizard. Click “Continue” to proceed to the next step. The next screen displays important information, please read it carefully. Click “Continue” when you are ready to continue.
4. Select a language (the default language is English) and click “Continue” to install the driver. 5. To read the software license click “Read License” and then click “Agree” to confirm you agree to the terms. You must agree to the terms to continue installing the software.
6. 7. If prompted, select which user to install the software for and click “Continue”. Click “Install” to install the driver.
8. You may be prompted to enter your system/administrative password before the installation can begin. Enter your password and click “Install Software”. 9. You will be prompted that you must restart your computer when the installation is complete. Click “Continue Installation” to proceed.
10. Please wait while the driver is installing. 11. When the installation is complete, you will see the following screen informing you that “The installation was successful”. Click “Restart” to restart your computer. 12. Next, please disable any other wireless adapters as described in V. Disabling Network Adapters. Then you can connect to a Wi-Fi network as described in VI. Using The Adapter.
IV-2. Driver Uninstallation 1. Open the “RTLWLANU_MacOS..” folder. 2. Double click the “Uninstall.pkg” file and follow the on-screen instructions.
V. Disabling Network Adapters To ensure that your USB wireless adapter can function correctly, it is recommended that you disable any other existing wireless network and Bluetooth adapters installed on your computer. If you are unsure how to do so, you can refer to the user manual for your computer, or follow the examples below. V-1. Windows 7 Go to Start > Control Panel. Click View network status and tasks > Wireless Network Connection and click Disable.
V-2. Windows 8.1 & 10 1. Go to File Explorer > Network (right click) > Properties > Change adapter settings. 2. Right click your wireless adapter, select “Properties” and then “Disable”.
V-3. Mac 1. Select “System Preferences” from the dock. 2. In “System Preferences”, select “Network”. 3. 4. All of your network connections will be displayed, as shown below. Select “Wi-Fi” from the left panel. Click “Turn Wi-Fi” off in the main panel.
VI. Using The Adapter After you have installed the driver and if necessary disabled other adapters, Windows users can connect to a Wi-Fi network or Bluetooth device as usual. Mac users need to connect to a Wi-Fi network using the included utility, as described in VI-2. Mac VI-1. Windows Below is an example of how to connect - the process may vary according to your Windows edition. 1. Click the network icon (examples below) in the system tray and select “Connect to a network”. 2.
3. After correctly entering your password, you will be successfully connected to your Wi-Fi network. 4. To connect to a Bluetooth device, go to Windows Bluetooth settings by using the search bar, or by right clicking the Bluetooth icon in the task bar and choosing Add a Bluetooth Device.
5. Select your Bluetooth device and click Pair and then confirm the passcode.
6. Your Bluetooth device will display Connected and is now available for use.
VI-2. 1. Mac Click the new USB adapter icon from the menu in the top right of your Mac desktop and select your Wi-Fi network as you usually would. 2. Enter the password (network key) for the Wi-Fi network and click “Join”. 3. After entering your password, you will be successfully connected to your Wi-Fi network and the icon will display the Wi-Fi signal strength.
4. You can use the other items in the menu to switch your USB adapter on/off, join another network (manually enter SSID name) display WPS PIN or activate WPS push button mode. WPS (Wi-Fi Protected Setup) is a simple, alternative way to establish connections between WPS compatible devices. Most modern wireless network devices feature a built-in WPS button, which activates WPS on that device.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/35/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/53/EU, 2014/35/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives. Equipment: 1T1R 11n Wireless LAN with Bluetooth USB Adapter Model No.: EW-7611ULB The following European standards for essential requirements have been followed: Directives 2014/53/EU Spectrum : EN 300 328 V2.1.1 (2016-11) EMC : EN 301 489-1 V2.1.1 (2017-02) EN 301 489-17 V3.1.
