User Manual

115
III-3-10-4. Backup/Restore
Backup Settings
Click “Save” to save the current settings on your
computer as config.bin file.
Restore Settings
Click “Browse” to find a previously saved
config.bin file and then click “Upload” to replace
your current settings.
Restore to
Factory Default
Click “Reset” to restore settings to the factory
default. A pop-up window will appear and ask
you to confirm and enter your log in details.
Enter your username and password and click
“Ok”. See below for more information.
Debug Logs
Click to save a log file of wireless information to
your computer as a .txt file.
III-3-10-5. Upgrade
The upgrade page displays the current firmware version and allows you to
upgrade the system firmware to a more recent version. You can download
the latest firmware from the Edimax website and upgrade manually using
the Choose File button or you can click the Check the latest version button
to check your version and automatically upgrade if a newer version is
available. After the upgrade, the system will restart.
Do not switch off or disconnect the device during a firmware
upgrade, as this could damage the device. It is recommended that
you use a wired Ethernet connection for a firmware upgrade and
that you backup your existing firmware before upgrading.