EW-7478APC Quick Installation Guide 11-2020 / v1.
Package Contents Before you start using this product, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s): EW-7478APC Quick Installation Guide CD-ROM Power Adapter 1 Ethernet Cable Access Key Card
Installation 1. Connect the network port of your EW-7478APC to the LAN port of your existing router using an Ethernet cable. 2. Plug the included power adapter into the device’s 12V DC power port and the other end into an electrical socket. 3. Check that the power LED displays on.
. Please refer to the default Wi-Fi SSID and password printed on the Access Key Card to connect Wi-Fi. iOS 4 or Android 4 and above are required for setup on a smartphone or tablet. 5. You can enjoy your Wi-Fi now. If you want to change the operating mode and configuration, continue to Browser Based Configuration Interface. Access Point Mode Wi-Fi Router Mode Wi-Fi Extender Mode Wi-Fi Bridge Mode WISP Mode The device connects to an existing router via Ethernet cable and provides 2.
Browser Based Configuration Interface 1. Make sure your EW-7478APC is connected to your router. 2. Connect your network device to the EW-7478APC Wi-Fi directly. 3. You can login to http://edimax.setup and configure or change operation mode and settings. Enter http://edimax.setup into the URL bar of a web browser on a network device which is connected to the EW-7478APC. 4. The default username is “admin” and the default password is “1234”. 5. Use the menu down the left side to navigate.
LED Status LED Power Color White Off Description The device is on. The device is off. On Internet Blue Wi-Fi Blue USB Status On Blue Internet connection is ready. Restoring to factory default state, Flashing or Ethernet cable not connected, or no Internet connection. 2.4G and/or 5G Wi-Fi wireless On activity (transferring/receiving data). Flashing WPS is active. Off On Off Wi-Fi not active. USB connection is ready. USB is not active.
FAQs 1. I can’t access the Internet. a. Ensure that all cables are connected properly. Try a different Ethernet cable. b. Check if you can access the web based configuration interface. If not, please ensure your computer is set to use a dynamic IP address. Refer to the user manual for guidance if you are unsure how to do this. c. Login to the web based configuration interface and go to Internet > WAN Setup and check that the connection type is correct.
3. I forgot my password. a. Reset the router to its factory default settings and use the default username admin and default password 1234. Default settings are displayed on the product label on the back of the device, as shown above. 4. Do the blue WAN port and yellow LAN ports work the same when the device is in different modes? No, the WAN and LAN ports have slightly different functions depending on the operating mode of the device. a.
6. How do I share a printer? (Router mode only) a. Go to USB Basic Settings at http://edimax.setup and enable USB Sharing and select Print Server. Connect your printer to the device with a USB cable and ensure printer drivers are installed on computers that you wish to share the printer with. Then install the Edimax Device Server Utility from the included CD (the utility can also be downloaded from USB Basic Settings). 7. How do I setup a VPN server? (Router mode only) a.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/35/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/53/EU, 2014/35/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives. Equipment: AC1200 Gigabit Dual-Band Wi-Fi Access Point Model No.: EW-7478APC The following European standards for essential requirements have been followed: Directives 2014/53/EU Spectrum EMF : EN 300 328 V2.1.1 (2016-11) EN 301 893 V2.1.1 (2017-05) : EN 301 489-1 V2.2.0 (2017-03) EN 301 489-17 V3.2.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.
