Operation Manual

III. Browser Based Configuration Interface

After you have setup the EW-7478APC as detailed in II. Installation or the

included Quick Installation Guide, you can use the browser based

configuration interface to configure advanced settings.

Please ensure that your computer is set to use a dynamic IP

address. Refer to IV-1. Configuring your IP address for more

information.

III-1. Login

1. Make sure your EW-7478APC is connected to your router.

2. Connect your network device to the EW-7478APC Wi-Fi directly.

3. You can login to http://edimax.setup and configure or change operation

mode and settings. Enter http://edimax.setup into the URL bar of a web

browser on a network device which is connected to the EW-7478APC.

4. You will be prompted for a username and password. The default

username is “admin” and the default password is “1234”.