User manual

8
BASIC SETTINGS
Resetting the Wi-Fi Extender
If your Wi-Fi extender is not functioning correctly, or if you want to run iQ
Setup again, press and hold the WPS button for 10 seconds to reset the
extender to factory defaults (the power LED will flash as the device resets to
factory defaults).
Enabling/Disabling the LED Indicators
1. Open your web browser and input the access key in address bar to log in
the extender’s web configuration interface.
Note: The access key can be found on the access key card in the box
and on the Wi-Fi extender.
2. You will be prompted to log in. The default username is “admin” and the
default password is “1234”. Click “OK” to continue.
3. Click “Advanced Settings”.