User manual

Note: If the Wi-Fi network to which you wish to connect does not

appear, click “Refresh” to detect again or try to move the extender

closer to the root wireless access point.

7. Input the same password as the existing Wi-Fi network in the “KEY” field

and click “Next” to continue.

Note: The extender must have the same Wi-Fi password as the root

wireless access point.

8. By default, the extender’s SSID is the root access point’s SSID+mac address.

You can change the extender’s SSID if you want. Click “APPLY” to complete

the setup.

9. After you have connected the extender to the existing Wi-Fi network, you

can move this extender to another location for optimal Wi-Fi extension. It

is recommended that you install the extender where the signal strength

LED is on (but not flashing) for better Wi-Fi performance.