Operation Manual

Authentication

Mode

Shows the authentication mode of this wireless

repeater.

Passphrase Key Here shows asterisks (*) to indicate wireless

security is properly set.

Config Mode There are ‘Registrar’ and ‘Enrollee’ modes for the

WPS connection. When ‘Registrar’ is enabled,

the wireless clients will follow the repeater’s

wireless settings for WPS connection. When

‘Enrollee’ mode is enabled, the repeater will

follow the wireless settings of wireless router for

WPS connection.

Start PBC Click ‘Start PBC’ to start Push-Button style WPS

setup procedure. This wireless repeater will wait

for WPS requests from another wireless device

for 2 minutes.

The ‘WPS’ LED on the wireless repeater will be

blinking for 2 minutes when this wireless repeater

is waiting for incoming WPS request.

Start PIN Please input the PIN code of the wireless client

you wish to connect, and click ‘Start PIN’ button.

The ‘WPS’ LED on the wireless repeater will be

blinking when this wireless repeater is waiting for

incoming WPS request.



NOTE: For WPS2.0 compliance specification, WEP and WPA-PSK

can’t support WPS connection, some of wireless devices may follow

this latest WPS2.0 specification, so we recommend you not to use

WEP and WPA-PSK to avoid WPS interoperabilit

problem.