Operation Manual

16
button to get connected.
8. By default, the extender’s SSID is the same as the root access point’s
SSID. You can change the extender’s SSID if you want. Click
“APPLY” to complete the setup.
9. Please wait for few seconds for wireless repeater to reboot.
10. After reboot complete, web browser will login repeater’s home page
of Web UI. You can close browser and use your computer to connect
to wireless access point by the SSID you set in last step and start using
network.
2-2 Repeater mode Advanced Settings
NOTE: After wireless connection of this repeater and wireless broadband router is
built, repeater is DHCP client and will get IP address from broadband router
automatically. If you want to login Web UI of repeater, please refer to ‘2-2
Repeater mode Advanced Settings’ for more functions or learn how to login web
UI again.