User Manual

FCC Test Report
Report No. : FR442525
SPORTON INTERNATIONAL INC. Page No. : 18 of 57
TEL : [phone] Report Version : Rev. 01
FAX : [phone]
3.3 RF Output Power
3.3.1 RF Output Power Limit
RF Output Power Limit
Maximum Peak Conducted Output Power or Maximum Conducted Output Power Limit
2400-2483.5 MHz Band:
If G
TX
≤ 6 dBi, then P
Out
≤ 30 dBm (1 W)
Point-to-multipoint systems (P2M): If G
TX
> 6 dBi, then P
Out
= 30 – (G
TX
– 6) dBm
Point-to-point systems (P2P): If G
TX
> 6 dBi, then P
Out
= 30 – (G
TX
– 6)/3 dBm
Smart antenna system (SAS):
Single beam: If G
TX
> 6 dBi, then P
Out
= 30 – (G
TX
– 6)/3 dBm
Overlap beam: If G
TX
> 6 dBi, then P
Out
= 30 – (G
TX
– 6)/3 dBm
Aggregate power on all beams: If G
TX
> 6 dBi, then P
Out
= 30 – (G
TX
– 6)/3 + 8dB dBm
e.i.r.p. Power Limit:
2400-2483.5 MHz Band
Point-to-multipoint systems (P2M): P
eir
p
≤ 36 dBm (4 W)
Point-to-point systems (P2P): P
eir
p
≤ MAX(36, [P
Out
+ G
TX
]) dBm
Smart antenna system (SAS)
Single beam: P
eir
p
≤ MAX(36, P
Out
+ G
TX
) dBm
Overlap beam: P
eir
p
≤ MAX(36, P
Out
+ G
TX
) dBm
Aggregate power on all beams: P
eir
p
≤ MAX(36, [P
Out
+ G
TX
+ 8]) dBm
P
Out
= maximum peak conducted output power or maximum conducted output power in dBm,
G
TX
= the maximum transmitting antenna directional gain in dBi.
P
eir
p
= e.i.r.p. Power in dBm.
3.3.2 Measuring Instruments
Refer a test equipment and calibration data table in this test report.