User Manual

FCC Test Report
Report No. : FR442525
SPORTON INTERNATIONAL INC. Page No. : 16 of 57
TEL : [phone] Report Version : Rev. 01
FAX : [phone]
3.2 6dB Bandwidth
3.2.1 6dB Bandwidth Limit
6dB Bandwidth Limit
Systems using digital modulation techniques:
6 dB bandwidth ≥ 500 kHz.
3.2.2 Measuring Instruments
Refer a test equipment and calibration data table in this test report.
3.2.3 Test Procedures
Test Method
For the emission bandwidth shall be measured using one of the options below:
Refer as FCC KDB 558074, clause 8.1 Option 1 for 6 dB bandwidth measurement.
Refer as FCC KDB 558074, clause 8.2 Option 2 for 6 dB bandwidth measurement.
Refer as ANSI C63.10, clause 6.9.1 for occupied bandwidth testing.
For conducted measurement.
The EUT supports single transmit chain and measurements performance of this transmit chain
port 1.
The EUT supports diversity transmitting and the results on transmit chain port 1 is the worst case.
The EUT supports multiple transmit chains using options given below:
Option 1: Multiple transmit chains measurements need to be performed on one of the active
transmit chains (antenna outputs). All measurement had be performed on transmit chains 1.
Option 2: Multiple transmit chains measurements need to be performed on each transmit
chains individually (antenna outputs). All measurement had be performed on all transmit
chains.
3.2.4 Test Setup
Emission Bandwidth