EW-7438RPn Air Quick Installation Guide 02-2014 / v1.
I. Product Information I-1. Package Contents - EW-7438RPn Air CD with multi-language QIG & user manual Quick installation guide (QIG) Access key card I-2. System Requirements - Existing 2.4GHz wireless network - Computer with 2.4GHz 802.11/b/g/n Wi-Fi adapter, and web browser for software configuration (Internet Explorer 8® or above, Google Chrome®, Firefox® or Safari® latest version) - iOS 5 above or Android 4.x above for mobile app I-3.
On Successful WPS connection Green Flashing Off Off WPS in progress Sleep Mode II. Installation 1. Plug the EW-7438RPn Air into a power socket. The LED will flash red while the system is booting up. The device is ready when the LED displays on (red). 2. Use a Wi-Fi device (e.g. computer, tablet, smartphone) to search for a Wi-Fi network with the SSID “EdimaxEXT.Setup **” and connect to it. If you are using a computer, please disconnect any Ethernet cables. For mobile devices, iOS 5 or Android 4.
3. Open a web browser and if you do not automatically arrive at the “Get Started” screen shown below, enter the URL http://edimaxext.setup and click “Get Started” to begin the setup process.
If you cannot access http://edimaxext.setup, please make sure your computer is set to use a dynamic IP address. For more information please refer to the user manual. 4. Please read the on screen instructions about selecting a good location for your wireless extender and then click “NEXT” to continue. You can check your signal strength on the next page. 5. Select your Wi-Fi network from the list and enter the security key/password. You can also enter a new Wi-Fi network name (SSID) if you wish.
7. When the connection test is complete, click “Apply” to restart the extender. 8. Please wait a moment until the extender is ready. 9. A final congratulations screen will indicate that setup is complete. The EW-7438RPn Air is working and ready for use - the LED should display on or flashing blue depending on your signal strength. To download the EdiRange app, click the icon or scan the QR code.
Android: iOS: 10. Please close the browser window. You can now connect to the extender’s new SSID on a wireless device within range such as a computer, smartphone or tablet. The password for your Wi-Fi extender’s SSID is the same as for your router’s SSID. For more advanced configurations, use the browser based configuration interface (refer to IV. Browser Based Configuration Interface or the user manual for more information).
III. Reset the Extender If you experience problems with your extender or if you want to change the extender to a different operating mode, you can reset the device back to its factory settings. This resets all settings back to default. 1. Press and hold the WPS/Reset button for at least 10 seconds until the LED is flashing red. 2.Wait for the extender to restart. The extender is ready for setup when the LED displays on (red).
IV. Browser Based Configuration Interface After setup you can use the browser based configuration interface to configure advanced settings. 1. To access the browser based configuration interface enter http://edimaxext.setup into the URL bar of a browser on a network device which is connected to the same Wi-Fi network as the extender. 2.You will be prompted for a username and password. The default username is “admin” and the default password is “1234”. Windows: 3.
V. WPS If your wireless router/access point supports WPS (Wi-Fi Protected Setup) then you can use this method to setup your wireless extender. 1. Press the WPS button on your wireless router/access point to activate its WPS. Please check the instructions for your wireless router/access point for how long you need to hold down its WPS button. 2. Within two minutes, press and hold the WPS button on the wireless extender for two seconds.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1995/95/EC, 2011/65/EC. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 1995/95/CE, 2011/65/CE. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 1995/95/ES, 2011/65/ES.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directive 1999/95/EC, and directive 2011/65/EC(RoHS) . Equipment: Model No.: N300 Smart Wi-Fi Extender EW-7438RPn Air The following European standards for essential requirements have been followed: Spectrum: EMC: EMF: Safety (LVD): ETSI EN 300 328 V1.8.1 (2012-06) EN 301 489-1 V1.9.2 (2011-09); EN 301 489-17 V2.2.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions.
