Datasheet

Features

• Complies with IEEE 802.11b/g/n standards

• Supports 2.4000 to 2.4835GHz frequency bands

• Network data rates up to 150Mbps

• Auto rate fallback in cases of interference

• Features WDS (Wireless Distribution System) repeater mode

• Supports WDS with AP mode

• Supports WEP, WPA, WPA2, AE2, 802.1x authentication

• Features WPS (Wi-Fi Protected Setup)

• Web-based configuration interface

• Firmware upgradable

• Features LNA (Low Noise Amplifier)

• Supports gateway, bridge and WISP operation modes

• Supports VPN pass-through for PPTP, IPsec and L2TP connections

Product

150Mbps Wireless High Power Outdoor Range

Extender/Access Point

Frequency Bands 2.4 - 2.484GHz

Flash 4MB NOR Flash

RAM 32MB SDRAM

LAN Port 10/100M Passive PoE Port x 1

Antenna

Internal: 12dBi directional panel antenna

External (optional): SMA connector

Output Power

11n: 22±1dBm, -89dBm

11g: 26±1dBm, -91dBm

11b: 27±1dBm, -93dBm

Power 12V DC, 1A

Dimensions 225 (H) x 77 (W) x 59 (D) mm

Weight 250g (8.82oz)

Temperature Operating: -20 to 70°C

Humidity

Operating: 10-90% (non-condensing)

Storage: Max. 95% (non-condensing)

Certification FCC

Specifications

*Maximum performance, actual data rates and coverage may vary depending on network conditions and environmental factors. Stated ranges

are based on independent test results and are not guaranteed. Long range coverage requires an additional high power access point to receive

the wireless signal from the EW-7303HPn V2 – coverage range from an EW-7303HPn directly to a computer/wireless device is significantly less.

N150 High Power Outdoor Wireless Access Point/Range

Extender with Built-in 12dBi Antenna

EW-7303HPn V2