Quick Start Guide

other. You can enter a setting ranging from 0 to 2347 bytes.
TX Power
The default TX power is 100%. In case of shortening the distance and the
coverage of the wireless network, input a smaller value to reduce the radio
transmission power. For example, input 80 to apply 80% Tx power.
Short Preamble
Default: Disable. It is a performance parameter for 802.11 b/g mode and not
supported by some of very early stage of 802.11b station cards. If there is no such
kind of stations associated to this AP, you can enable this function.
Short Slot
It is used to shorten the communication time between this AP and station.
TX Burst
The device will try to send a serial of packages with single ACK reply from the
clients. Enable this function to apply it.
Country Code
Select the country code for wireless from pull down menu.