User Manual

37
Manage Settings
to backup the EW-7288APC’s settings, restore the settings to a previous
version or restore the EW-7288APC back to its factory default state.
Backup Settings
Click “Save” to save the current settings on your
computer as config.bin file.
Restore Settings
Click “Browse” to find a previously saved
config.bin file and then click “Upload” to replace
your current settings.
Restore to
Factory Defaults
Click “Reset” to restore settings to the factory
default. A pop-up window will appear and ask
you to confirm and enter your log in details.
Enter your username and password and click
“Ok”. See below for more information.
Upgrade Firmware
You can upgrade the system firmware to a more recent version. You can
download the latest firmware from the Edimax website. After the upgrade,
the system will restart.
Browse
Open a new window to locate and select the
firmware file in your computer.
Reboot
In the event that the extender malfunctions or is not responding, then it is
recommended that you restart the device.
Rebooting the EW-7288APC will not affect the current
configuration/settings of the device.
Apply
Click “Apply” to reboot the device. A status
bar will indicate the progress of the reboot
and you will see a confirmation screen when
the reboot is complete.