User Manual

28
Beacon Interval
Set the beacon interval of the wireless radio.
The default value is 100.
Data Rate
Set the wireless data transfer rate. The
default is set to Auto.
Channel Width
Select wireless channel width (bandwidth
used by wireless signals from the device) –
the recommended value is 20/40/80MHz.
Preamble Type
Set the wireless radio preamble type. The
default value is “Long Preamble”.
Broadcast SSID
Enable or disable to broadcast SSID or not.
WMM
WMM (Wi-Fi Multimedia) technology can
improve the performance of certain network
applications, such as audio/video streaming,
network telephony (VoIP) and others. When
WMM is enabled, the device will prioritize
different kinds of data and give higher
priority to applications which require instant
responses for better performance.
Tx Power
Set the power output of the wireless radio.
You may not require 100% output power.
Setting a lower power output can enhance
security since potentially malicious/unknown
users in distant areas will not be able to
access your signal.
Wi-Fi Bridge Mode:
The “Advanced Settings” page allows you to adjust
the power output and LED operation of the
EW-7288APC. The submenu options listed under
“Advanced Settings” allow you to configure password
and administrative IP functions, as well as
restart/restore and upgrade firmware.