User Manual

25
III-3-4. WPS Setting
Wi-Fi Protected Setup is a simple way to establish
connections between WPS compatible devices. WPS
can be activated on compatible devices by pushing a WPS button on the
device or from within the device’s firmware/configuration interface. When
WPS is activated in the correct manner and at the correct time for two
compatible devices, they will automatically connect. PIN code WPS includes
the use of a PIN code between the two devices for verification.
Enable WPS
Check/uncheck this box to enable/disable
WPS.
WPS Status
Displays “Configured” or “unConfigured”
depending on whether WPS and SSID/security
settings for the device have been configured or
not, either manually or using the WPS button.
Self PIN Code
Displays the WPS PIN code of the device.