User Manual

20
III-3-2. iQ Setup
You can run the iQ Setup wizard to configure the
basic settings of the EW-7288APC. Refer to the
appropriate instructions below for each mode if you need help.
Access Point Mode
In access point mode, iQ Setup provides a quick way to configure your
EW-7288APC’s IP address as well as SSID & password.
1. Select “Obtain an IP address automatically” or “Use the following IP
address” for your EW-7288APC. If you are using a static IP, enter the IP
address, subnet mask and default gateway. Click “NEXT” to proceed to the
next step.
“Obtain an IP address automatically” is the recommended setting
for most users. For more guidance on static IP addresses, please
refer to IV-1. Configuring your IP address.
2. Enter a new SSID/Wi-Fi network name & password for your EW-7288APC
if you wish, and choose to enable or disable a hidden SSID, then click
“NEXT”.
A hidden SSID will not be visible to your Wi-Fi devices and must be
entered manually in order to connect.
It is not recommended to disable your Wi-Fi password.