User Manual

10
2. Enter the Wi-Fi password which is displayed on the label on the underside
of the EW-7288APC (see above).
3. Open a web browser and enter the URL http://edimax**.setup , then you
will arrive at the “Get Started” screen shown below, and click “Get Started”
to begin the setup process.
** are the last two characters of the EW-7288APC’s MAC address.
The MAC address and full URL are displayed on the label on the
underside of the EW-7288APC and the included access key card.
You can also use the device’s default IP address 192.168.9.2
4. Please read the on screen instructions about selecting a good location for
your EW-7288APC and then click “NEXT” to continue. You can check your
signal strength on the next page.
5. Select your 5GHz Wi-Fi network from the list and enter the security
key/password. You can also enter a new Wi-Fi network name (SSID) if you
wish. Click “Next” to continue.
Check the box “Connect to a hidden network” if you wish to
connect to a hidden SSID and manually enter the details.