User manual

5
Back Panel
z
Antenna Connector
This is where you connect the antenna. It is a round connector
(standard Reverse SMA).
z 5 VDC
This is where you connect the power adapter.
z WPS/Reset
Reset the access point to factory default settings (clear all
settings) or start WPS function. Press this button and hold for
20 seconds to clear all settings, and press this button for less
than 5 seconds to start WPS function.
z 10/100M LAN Port
This LAN port is where you connect the Access Point to your
Ethernet devices (switch or router or other wired devices).