EU-4307 Quick Installation Guide 03-2021 / v1.
I. Product Information I-1. Package Contents USB Type-C to 2.5G Gigabit Ethernet Adapter QIG I-2. System Requirements - Intel Premium III 1GHz ( or above) - 256MB RAM/CD-ROM / 100MB Hard Disk Space (at least) / 100MB Hard Disk Space (at least) / USB Type C Port - Windows 7/8/8.1/10, Mac OS 10.6 – 10.10 or above I-3. Safety In order to ensure the safe operation of the device and its users, please read and act in accordance with the following safety instructions. 1.
II. Installation 1. Switch on your computer and connect the Ethernet Adapter to an available USB type C port of your computer. Never use force to insert the USB adapter. 2. Mac users please download the driver from https://www.edimax.com/download to your computer. For Window users, the built-in setup wizard will automatically install the driver. 3. Please follow the instructions in the appropriate chapter for your operating system.
II-1. Windows Driver Installation 1. Connect the Ethernet Adapter to an available USB type C port of your computer. Double click to run the installer. 2. The driver will then be installed automatically. Opens up Computer Management, click “System Tools”, “Device Manager”, then “Network adapters”, “Realtek Gaming USB 2.5GbE Family Controller” should appear if the driver is installed successfully.
II-2. Mac OS Driver Installation 1. Enter the MAC OS 10.6 to 10.13 folder and click the “RTUNICvx.x.x.pkg” (“x.x.x” is driver revision number), and the following driver setup dialog will appear. “Click Continue” to start the installation and follow the instructions to continue the installation. 2. Click “Continue” to read the Read Me interface, choose the language, accept the software license agreement, and then continue the installation process.
3. You might need to enter your user/password during the driver installation. 4. Click “Continue Installation” to continue the installation process. 5. Click “Restart” to restart your Mac OSX system and finish the installation.
6. After booting up your Mac OSX system, plug your EU-4307 USB dongle onto the USB type C port of your Mac OSX system. Refer to the following information to double check that your USB dongle has been identified properly by your Mac OSX system and that the driver has been installed correctly. (1) You can check the Vendor/Product ID information of your USB dongle from here.
(2) You can check the installed RTUNIC Mac OSX driver version information by running the “kextstat” command 7. Choose Apple menu, System Preferences, then click Network. Select the new “RTUNIC USB 3.1 to Gigabit Ethernet” network interface and press “Create” followed by “Apply” for the new network interface to take effect. 8. The new “RTUNIC USB 3.1 to Gigabit Ethernet” driver should be ready.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU, 2014/35/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/30/EU, 2014/35/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/30/EU, 2014/35/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: USB 3.1(Type C) to 2.5 Giga ethernet Port NIC Model No.