Datasheet
Integrate
PoE allows power to be supplied to end devices, such as
W
LAN cables. By supplying the power end-span, you can ce
increase infrastructure.
Features :
•Conforms to IEEE 802.3 10BASE-T, IEEE802.3u 100BA
S
10/100Mbps auto-detect half/full duplex
•Supports TP auto MDI/MDI-X function for auto TX/RX sw
a
•Supports 802.3x flow control pause packet for full duplex
PoE
Features :
PoE
Features
:
•Supports IEEE 802.3af compliant
•Supports Power over Ethernet (PSE) on each PoE-TP po
r
•Full power(15.4w) support for per PoE-TP port
•Auto detect powered device and consumption levels
•Smart feature for PD on/off, PD detection, power level, P
D
•
A
utomatic Fault Detection (Over/Under Voltage & Current
•Thermal shutdown protection (Tj> 150ºC)
Product
Standards IEE
E
No.ofPorts 8*
TransmissionMode 10
/
TransferRate
1
FlowControl
Ba
c
SwitchingMethod
LEDs
Temperature/Humidity
Voltage/Frequency
PowerConsumption
Physical Dimension
Physical
Dimension
Safety
ES-5844P
8 Port Fast Ethernet Switch
4 x Power Over Ethernet Ports
W
irelessAP or VoIP Phones, directly through the existing
ntralize power distribution and backup without the need to
S
E-TX and IEEE 802.3x flow control standards •Supports
a
p
r
t (End-Point)
D
status and power feeding priority (X)
)
ES‐5844P
E
802.310BASE‐T,IEEE802.3u100BASE‐TX
10/100MbpsRJ‐45portswith4PoE ports
/
100Mbps,full/hal
f
‐duplex(Auto‐sensing)
10Mbps:14880pps(64BytesPackage)
1
00Mbps:148800pps(64BytesPackage)
IEEE802.3xflowcontrolforfull‐duplex
c
kpressureinhal
f
‐duplexoperationmode
Store&forward
Power,Link/Act,Speed,PoE activity
0˚to50˚C/5%to90%
AC90‐264V/47‐63Hz
65W,‐48VD,1.35A
44(H) X 220(W) X 130 5(D) mm
44(H)
X
220(W)
X
130
.
5(D)
mm
FCCPart15ClassA&CEMarkApproval