Datasheet

FEATURES
•Eight 10/100Mbps Fast Ethernet PoE+ ports and two 10/100/1000Mbps combo ports.
•IEEE 802.3af/at PoE compliant for simplified deployment and installation.
•Up to 30W per port (total power budget: 160W) for powering PoE-enabled devices.
•Auto-detection of power devices(PD) and power consumption levels.
•IEEE 802.1Q VLAN allows network segmentation to enhance performance and security
•Switch capacity: 2.8Gbps
•IGMP Snooping V1 / V2 supported
•4K MAC address table supported
•13-inch rack-mountable metal case
www.edimax.com
ES-5208P
8-Port Fast Ethernet PoE+ with 2 Gigabit Combo Ports
Web-Smart Switch
APPLICATION DIAGRAM
Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors. Product specifications and design are subject to change without notice.
Copyright © 2015 Edimax Technology Co. Ltd. All rights reserved.
www.edimax.com
High Performance
The ES-5208P switch also supports auto-negotiation and non-blocking wire speed to give you the maximum
speed and highest performance possible for each device connected to your network.
•Auto-Negotiation
Each of the ES-5208P’s ports automatically detect whether connected network devices are running at 10Mbps
or 100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy
and hassle-free operation.
•Non-Blocking Wire Speed
Forwards and receives traffic seamlessly – each port supports speeds up to 200Mbps in full-duplex mode
simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network
smoothly.
Power Saving
Along with the Fast Ethernet speeds critical for next-generation network applications, the ES-5208P offers
environmental efficiency . To comply with the IEEE802.3az standard, the ES-5208P provides power saving
functionality to reduce energy consumption and save costs:
•Inactive Link Detection
When a network device is shut down and/or an inactive link is detected, the power usage adjustment feature
automatically reduces power usage. The switch’s power consumption will be dynamically adjusted according to
the link status and the number of active network devices.
•Cable Length Detection
Devices equipped with this feature automatically detect the length of connected Ethernet cables and adjust
power usage accordingly. The shorter the cable length, the less power it consumes.
xDSL Modem/Router
Internet
SOHO
Network Camera
PoE Splitter
PoE
Network Camera
PoE
Network Camera
Power Outlet
PoE
Access Point
PoE
IP Phone
Storage & Control
Data
Power + Data (PoE)
Power
Phone Line (RJ-11)
Uplink
ES-5208P PoE+
Web-Smart Switch