User manual

30
¾ Protocol: Shows the spanning tree protocol functioning on this port, either
RSTP or STP (that is, STP-compatible mode).
IGMP Status
IGMP Status
IGMP Status shows the IGMP Snooping statistics for the whole switch.
¾ VLAN ID: VLAN ID number.
¾ Querier: Show whether Querying is enabled.
¾ Queries transmitted: Show the number of transmitted Query packets.
¾ Queries received: Show the number of received Query packets.
¾ v1 Reports: Show the number of received v1 Report packets.
¾ v2 Reports: Show the number of received v2 Report packets.
¾ v3 Reports: Show the number of received v2 Report packets.
¾ v3 Leave: Show the number of v3 leave packets received.
Figure 2-5
VeriPHY
VeriPHY Cable Diagnostics
User can perform cable diagnostics for all ports or selected ports to diagnose
any cable faults (short, open etc..) and feedback a distance to the fault.
¾ Cable Diagnostics: Cable diagnostics is performed on a per-port basis.
Select the port number from the drop-down list.
¾ Cable Status: Shows the cable length, operating conditions and isolates a
variety of common faults that can occur on Category 5 twisted pair cabling.