User manual

26

Figure 1-13-1
¾ Enable Rate Limit: Click the check box to enable storm control.
¾ Rate (number of frames per second): The Rate field is set by a single
drop-down list. The same threshold is applied to every port on the switch.
When the threshold is exceeded, packets are dropped, irrespective of the
flow-control settings.
¾ Web: Click PORTS, Storm Control. This page enables you to set the
broadcast storm control parameters for every port on the switch.
Figure 1-13-2
Monitoring
Statistic Overview
Statistic Overview for all ports
User can mirror traffic from any source port to a target port for real-time
analysis the following figures shows clearly the statistics overview.