User`s guide

DNS Configuration
Setup Domain
Domain List – The device supports multi-domains.
SOA (Start Of Authority)
Record
• Domain Name/Primary Name Server –These are fully qualified
domain names (FQDN). e.g.
www.xyz.com. It should terminate
with a dot (.), otherwise the domain name will be added after it.
• Admin. Mail Box –Email address for the domain administrator.
You should use dot(.) to replace the at symbol(@) in the mail
address.
e.g. if Email address is [e-mail]. you should fill it as
super.xyz.com.
• Serial Number/Refresh Interval/Retry Interval/Expiration
/Minimum TTL –These are referenced in RFC1035 or set by the
default value.
NS (Name Server) Record
• Pri. Name Server/Sec. Name Server –IP Address of your DNS
server.
• Public WAN IP Address –By default, this is: 0.0.0.0. This device
will use the current WAN port IP address the same as DNS
index. e.g. DNS1 Pri./Sec. Name Server used WAN1/WAN2,
otherwise enter a public IP addresses provided by the ISP
MX (Mail Exchange)
Record
• Mail Exchange –FQDN for this mail server
• Preference –Preference is the priority order, 0 being the highest
priority.
• Location/IP Address –Select Private and fill IP Address with its
private address if mail server is inside your LAN. Otherwise
select Public and fill-in its public IP Address.
Page 75