User`s guide

Settings – QoS Setup.
QoS Feature
 Enable QoS – Checkbox allows users enable QoS mechanism. If set to
"enable" QoS. QoS will allocate Inbound/Outbound bandwidth to pass through
the device.
• WAN Inbound / Outbound Bandwidth –This allows you to set the maximum
inbound or outbound bandwidth, maximizing your network's performance. This
information can be obtained from your ISP
• Set Policy Button –Setting the policy can allocate Inbound/Outbound
bandwidth (based on your configuration) to pass through this device.
Policy Configuration
Setting the QoS policy can allocate Inbound/Outbound bandwidth (based on your configuration) to
pass through this device. You can define some policies which classify received packets based on
Local/Remote IP, MAC, port and protocol type. This feature is useful when the WAN link is very busy
or congested or when using special applications that need real time services such as Internet phone,
video conference...etc.
.
Figure 8-2: Policy Configuration
Page 70