User`s guide

Settings – Load Balance
Load Balance
Configuration
• Enable – This enables your Load Balance setting options and must be
checked for other settings on this screen to be effective.
• Balance Type – You can select the Balance types based on:
• Bytes Tx + Rx – Traffic is measured by Bytes. (Least load)
• Packets Tx + Rx – Traffic is measured by Packets. (Least load)
• Sessions established – Traffic is measured by Sessions. (Least load)
• IP Address – Traffic is measured by IP address. (Least load)
• Auto Learning – The largest unused upload/outgoing bandwidth.
• Fastest – The largest upload bandwidth.
• Priority – The highest priority.
• Round Robin – Continuously repeating sequence.
• Weight Round Robin – In sequence with weight placed accordingly.
• Loading Share – Enter the percentage (%) of traffic to be sent over each
WAN port. If one WAN port connection has a greater bandwidth than another,
the one with the greater bandwidth is given a higher percentage of traffic than
the other.
Click the "submit" button to save your changes.
Traffic
Statistics
Configuration
• Current Statistics – Enable current packets loading share statistics for
WAN1 & WAN2.
• Overall Statistics – Enable overall packets loading share statistics for WAN1
& WAN2.
• Accumulated Statistics – Enable Accumulated statistics for WAN1 & WAN2
for a define time interval.
Current
Statistics
Current loading share table for WAN! & WAN2
Overall
statistics
Overall loading share table for WAN1 & WAN2
Page 23