User`s guide

• Enter the name of the firmware upgrade file located on your PC, or click the "Browse" button
to locate the file.
• Enter the LAN IP address of the Multi-WAN VPN Link Balancer in the "Server IP" field.
• Click "Upgrade Firmware" to send the file to the Multi-WAN VPN Link Balancer.
3. When the upgrade is finished, the Multi-WAN VPN Link Balancer should work normally. The
factory default settings will be applied.
Note:
The supplied Windows TFTP utility also allows you to perform three (3) additional operations:
• Save the current configuration settings to your PC (use the "Save Configuration" button).
• Restore a previously saved configuration file to the Multi-WAN VPN Link Balancer (use the
"Upgrade Firmware" button).
• Set the Multi-WAN VPN Link Balancer to its default values (use the "Set to Default" button).
Page 8