Datasheet

ManualsBrandsEDIMAX ManualsNetwork ComponentsNetwork adapter 10 Gbit/s 10GbE Gigabit Ethernet PCI Express Adapter

EN-9320TX-E

Maximum performance and actual data rates will vary depending on network conditions and environmental factors. Product specifications and design are subject to change without notice.

www.edimax.com

10 Gigabit Ethernet PCI Express Server Adapter

The EN-9320TX-E is a 10 Gigabit Ethernet PCI Express Server Adapter designed for the high-speed PCI Express bus

architecture. This meets the high-performance requirements such as large file transfers and HD video editing, which

utilizes high-performance shared storage system to have improved server efficiency and network performance.

Connecting the EN-9320TX-E with the RJ45 cable, your system instantly upgraded to superior performance in fast and

reliable10Gbps high-speed. The EN-9320TX-E is an ideal selection to upgrade your server or workstation as the high-

performance, low-power consumption and better-quality solution to complement the requirements of low latency, high

bandwidth, high-throughput and cost-effective Gigabit Ethernet Adapter.

10GbE Superior Network Speed

Equipped with one 10 Gigabit RJ45 interface, the EN-9320TX-E is capable of providing 10 times better performance

than existing Gigabit transmissions. The adapter is an easily capable server NIC of your networks that supports up to

2000Mbps full-duplex bandwidth capacity. With the PCI Express rev. 2.0 specification x4 Interface, the EN-9320TX-E

provides an optimal PCI Express upgrade solution to the main board.

Advanced Features and Security

The EN-9230TX-E is designed with high-speed PCI Express bus architecture that includes advanced features and

security. It sports 802.1Q Virtual LAN (VLAN) tagging for Ethernet frames, allowing the network administrator to

assign multiple subnets to each server. Moreover, it can separate devices within each VLAN from the rest of the

network for better traffic management. This provides flexible operation while having a secure and simple network

environment. In addition, the EN-9320TX-E supports other advanced features such as 16K Jumbo Frame to maximize

the throughput and IEEE 802.3x Flow Control, which avoids risks of packet loss for best performance in data transfer.

Cost-effective and Easy Migration 10G Adapter

With 10Gbps high-speed, Edimax EN-9320TX-E adapter offers cost-effective solution on 10 Gigabit network

connection. The distance can reach up to 100 meters over structured Cat.6a or Cat.7 RJ-45 cabling without the need

to rewire the infrastructure to fiber. Designed with the latest 10Gbps high-speed technology, the EN-9320TX-E is

completed compatible with 10/5/2.5/1Gbps and 100Mbps networking standards and existing copper network.

Linux

Jumbo

Frame

PCI

Express

Windows

Base

10Gbps

Low Profile Bracket Included

10G Spec

Interface

Media

Maximum Distance

Total Ownership Cost

10GBase-T

RJ-45

Cat.6a/Cat.7 UTP cable

100 meters / 328 ft.

Low

10GBase-CX4

CX4

Copper

15 meters / 49 ft.

Medium

Summary of content (2 pages)

PAGE 1
Low Profile Bracket Included 10Gbps EN-9320TX-E PCI Express Jumbo Frame Windows Base Linux 10 Gigabit Ethernet PCI Express Server Adapter The EN-9320TX-E is a 10 Gigabit Ethernet PCI Express Server Adapter designed for the high-speed PCI Express bus architecture. This meets the high-performance requirements such as large file transfers and HD video editing, which utilizes high-performance shared storage system to have improved server efficiency and network performance.
PAGE 2
EN-9320TX-E 10 Gigabit Ethernet PCI Express Server Adapter KEY FEATURES •PCI Express rev. 2.0 Specification x4 interface •10 Gigabit throughput with 100-meter UTP cable •Backward compatible with 1000Bast-T, 100Base-TX network •16K jumbo frames •IP, TCP, UDP checksum offloading •Reduced CPU utilization and improved through •Supports IEEE 802.1Q VLAN ID tagging and IEEE 802.1q QoS •Low profile bracket included SPECIFICATIONS Hardware Attachment Interface PCI Express Rev. 2.