Gigabit Ethernet PCI Adapter EN-9230TX-32 Quick Installation Guide (Q.I.G.) Version 3.
English Version. 1. Introduction Thank you for purchasing our Gigabit Ethernet Adapter. This guide is to provide the installation and usage of this adapter for network installers and users. The Gigabit network adapter complies to 32-bit and supports Half/Full- duplex feature which can double network speed.
. Technical Specification Topology Connector Standard Transmission Rate Star RJ-45 IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3ab 1000Base-TX 10Mbps/20Mbps 100Mbps/200Mbps 1000Mbps/2000Mbps Hardware Required IBM compatible PC with available PCI slot IRQ & I/O Address Assigned by system Drivers Windows 98/98SE/Me/NT/ 2000/XP, Netware Server 4.x/5.x/6.x, Netware ODI for Linux, Unix, MAC OSX 10.2.x/10.
5. Driver Installation Insert the installation CD into your CDROM drive, the setup programs will appear, select “EN-9230TX-32” then click on the “Product Driver” to install the driver, or you can click on the “Browse CD” to find other OS drivers on the CD. 6.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.