IC-7110 / IC-7110W / IC-7110P Quick Installation Guide 06-2012 / v2.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
PRODUCT INTRODUCTION Package Contents Before you start using this product, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s): 1 x Network camera 1 x Power adapter 1 x Ethernet cable 1 x Quick installation guide 1 x CD with utility software, user manual, and multi-language QIG 1 x Mounting kit 1 x Accessory kit 2 x Detachable antenna (IC-7110W only) 1 x Cloud ID card LED Indicators LED Name Description Power/Cloud The power L
GETTING STARTED 1. Connect the network camera’s “LAN” port to a router or switch’s “LAN” port with an Ethernet cable, then power on the network camera. 2. If you have a wireless model, connect the antennas to the antenna connectors.
Configuring the EdiView Finder Utility 3. Insert the Edimax CD into your CD-ROM drive and click “Setup Utility” to install the utility software. The setup wizard will guide you through the setup process. Note: MacOS utility is supported and you can download from our website. 4. After EdiView Finder is launched, all cameras found on the LAN are displayed. To connect to a specific camera, double-click the camera listing. Enter the password for the camera (default: 1234) in the login dialogue.
Configuring the Web-Based Management Interface 5. Launch IE and type the IP address of the camera (found by running EdiView), and enter “admin” in the username field, and “1234” in the password field to log in. 6. Once you are logged in, the browser will prompt you to install ActiveX. Click “Install ActiveX Control…” to continue. 7. You should now be able to see the video images captured by your new Edimax network camera. For advanced settings, please refer to the user manual included in the CD.
Viewing the Camera with a Smartphone 8. Please go to the Apple App store or Google Android market to download “Ediview”. Enter the Cloud ID, Username and Password to finish the installation. Note: Each network camera comes with a Cloud ID card which contains the camera’s Cloud ID (MAC address), username ( default : admin ) and password ( default : 1234 ). Note: You may also find Cloud ID by the following methods: 1. The sticker on the bottom of the camera says MAC:xxxxxxxxxxxxxx. 2.
Viewing the Camera with a Web Browser 9. Open your browser and enter “http://Your Cloud ID.myedimax.com” in the address bar. When myedimax.com loads, enter 1234 as the camera’s password to see the video on the Java Applet. Note: If you see “Java Applet is not supported by your browser…” Please go to www.java.com to update or install the Java Applet.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: French: Czechian: Polish: Romanian: Russian: Magyar: Türkçe: Ukrainian: Slovakian: German: Spanish: Italian: Dutch: Portugese: Norwegian: Swedish: Danish: Finnish: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC, 2009/125/EC.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directive (1995/5/EC). Equipment: Model No.: Report No.: 1.3Mpx Wireless H.264 Day & Night PT Network Camera IC-7110W EA9D1829, EH9D1829, ER9D1829AC, ER9D1829AI, L9D1829L089 The following European standards for essential requirements have been followed: EN 50385:2002 EN 301 489-1 V1.8.1 (2008-04) EN 301 489-17 V1.3.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European EMC directive (2004/108/EC). Equipment: Model No.: Report No.: 1.3Mpx H.264 Day & Night PT Network Camera 1.3Mpx PoE H.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.
15
