User manual

110
3. If no camera is found, an empty list is shown. Tap Add New Camera to
manually add a new network camera.
Manually Adding a Network Camera on a LAN in IP Mode
Note: Cameras added in IP mode can only be accessed on the local network.
1. Tap the Cloud to set the mode to IP.
2. Enter information into the following fields:
Parameter
Description
Camera Name
Define a name for the camera that is shown in the camera
list.
IP
Enter the IP address of a network camera.
Port
Enter the port number of the camera.
Username
Enter the username of the network camera. The default
value is admin.
Password
Enter the password of the network camera. The default
value is 1234.
3. Tap Done to add the camera to the list.