Specifications

Virtual Private Networking

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2

The VPN Wizard Summary screen displays:

To view the VPNC-recommended authentication and encryption settings used by the

VPN Wizard, click the here link.

5. Click Don

e on

the Summary screen.

6. The VPN Policie

s screen displays, showing that the new tunnel is enabled.

Note: See Use Auto Policy to Configure VPN Tunnels on page 101 for

information about how to enable the IKE keepalive capability on an

existing VPN tunnel.

7. Repeat these steps for the gateway on LAN B, and pay special attention to the following

network settings:

• WAN IP of the remote VPN gateway (for example, 14

.15.16.17)

• LAN IP settings of th

e remote VPN gateway:

- IP address (for example, 192.168.0.1)

Subnet mask (for example, 255.255.255.0)

Preshared key (for example, 12

345678)

8. Use the VPN S

tatus screen to activate the VPN tunnel by performing the following steps: