Specifications

USB Storage
68
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2
You can also type \\readyshare in the address field of your Web browser.
Note: If you logged in to the N300 wireless modem router before you
connected your USB device, you might not see your USB device in
the N300 wireless modem router screens until you log out and then
log back in again.
The following table explains the fields and buttons in this screen.
Fields and Buttons Description
Network Device Name The default is \\readyshare. This is the name used to access
the USB device connected to the N300 wireless modem
router.
Available Network
Folde
rs
Folder Name Full path of the used by the network folder.
Volume Name Volume name from the storage device (either USB drive or
HDD).
Total/Free Space Shows the current utilization of the storage device.
Share Name • You can click the name shown, or you can type it in the
address fi
eld of your Web browser.
• If Not Shared is shown, then the default share has been
de
leted and no other share for the root folder exists. Click
the link to change this setting.
Read/Write Access • Shows the permissions and access controls on the
network folder:
• All - no password allows all users to access the network
fol
der
.
• admin uses the same password that you use to log in to
the N30
0 wireless modem router main menu.
Edit button You can click the Edi
t button to edit the Available Network
Folders settings. See Edit a Network Folder on page 69.
Safely Remove USB Device button Click
to safely remove the USB device attached to your
N300 wireless modem router. See Unmount a USB Drive on
page 72.