Specifications

NETGEAR VPN Configuration
158
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2
The N300 wireless modem router reports the results of the attempt to connect. Once the
connection is established, you can access resources of the network connected to the
VPN router.
Right-click the system
tray icon to open the
pop-up menu.
To perform a ping test using this example, start from the remote computer:
a. Establish an Internet connection from the computer.
b. On the Windows taskbar, click the St
art button, and then select Run.
c. Type ping -t 192.1
68.0.1, and then click OK.
This causes a continuous ping to be sent to the VPN router. Within 2 minutes, the ping
response should change from timed out to reply.
Once the connection is established, you can open the browser on the computer and enter the
LAN IP address of the VPN router. After a short wait, you should see the login screen of the
VPN router (unless another computer already has the VPN router management interface
open).
Note: You can use the VPN router diagnostics to test the VPN connection
from the VPN router to the client computer. To do this, select
Diagnostics on the N300 wireless modem router main menu.