Specifications

NETGEAR VPN Configuration
156
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2
d. In the Internet Interface section, select Intel PRO/100VE Network Connection (in
this example; your Ethernet adapter might be different) in the Name field, and then
enter 192.168.2.3 (in this example) in the IP Addr field.
e. Click the Pre-Shared Key button
.
f. In the Pre-Shared Key
screen, click Enter
Key. Enter the DGND3300v2’s pre-shared
key and click OK. In this example, 12345678
is entered, though the screen shows
asterisks. This field is case-sensitive.
5. Configure the VPN Client Authentication
Proposal.
In this step, you provide the type of encryption
(DES or 3
DES) to be used for this connection. This selection has to match your selection
in the VPN router configuration.
a. In the Network Security Policy list on the lef
t side of the Security Policy Editor window,
expand the Security Policy heading by double-clicking its name or clicking the +
symbol.
b. Expand the Authentication
sub
heading by double-clicking its
name or clicking the + symbol.
Then select Proposal 1 below
Authentication.
c. In the Authentication Method
drop-down list, select Pre-Shared
Key.
d. In the Encr
ypt Alg drop-down
list, select the type of encryption.
In this example, use Triple DES.
e. In the Hash Al
g drop-down list,
select SHA-1.
f. In the SA Life drop-down list,
select Unspecified.
g. In the Key Group
drop-down list, select Diffie-Hellman Group 2.
6. Configure the VPN Client
Key Exchange Proposal.
In this step, you provide the type of encryption (DES or 3DES) to
be used for this
connection. This selection has to match your selection in the VPN router configuration.