Specifications

NETGEAR VPN Configuration
154
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2
c. Rename the new connection to
match the connection name you
entered in the VPN settings of
Gateway A. Choose connection
names that make sense to the
people using and administrating the
VPN.
Note: In this example, the connection
name on the client side of the VPN
tunnel is toGW_A. It does not have to
match the VPN_client connection
name used on the gateway side of the
VPN tunnel because connection
names do not affect how the VPN tunnel functions.
d. Select Secure in the Connectio
n
Security section.
toGW_A
e. Select IP Subnet in the ID Type
drop-down list.
f. In this example, type 19
2.168.0.1 in
the Subnet field as the network
address of the N300 wireless
modem router.
g. Enter 255.255.2
55.0 in the Mask
field as the LAN subnet mask of the
N300 wireless modem router.
h. Select All in the
Protocol
drop-down list to allow all traffic
through the VPN tunnel.
i. Select the Connect using
Secure Gateway Tunnel check box.
j. Select Domain Name in the ID Type
drop-down list, and enter fromGW_A.com (in
this example).
k. Select Gatewa
y Hostname and enter ntgr.dyndns.org (in this example).
3. Configure the security policy in the N300 wireless modem router software.
a. In the Network Security Policy list, expand th
e new connection by double-clicking its
name or clicking the + symbol. My Identity and Security Policy appear below the
connection name.