Specifications

Advanced Settings (Part 1)
111
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2
 To configure LAN settings:
1. Log in to the N300 wireless modem router, and from the main menu, select Advanced
> LAN Setup. The following screen displays:
2. After you make changes, you need to click Apply for the changes to take effect.
Note: If you change the LAN IP address of the N300 wireless modem
router while connected through the browser, you will be
disconnected. You need to then open a new connection to the new
IP address and log in again.
The LAN Setup fields are explained in the following table.
Settings Description
Device Name A descriptive name for the N300 wireless modem router,
which will be shown in the Network on Windows Vista and the
Network Explorer on all Windows systems. The Device Name
field cannot be blank.