User Manual

180
LAN-side IP Address
IP Address
Assignment
Select “Static IP” to manually specify a static/fixed IP address
for your AP. Select “DHCP Client” for your AP to be assigned a
dynamic IP address from your router’s DHCP server, or select
“DHCP Server” for your AP to act as a DHCP server and assign
IP addresses on your LAN.
Static IP Address
IP Address
Specify the IP address here. This IP address will be assigned to
your AP and will replace the default IP address.
Subnet Mask
Specify a subnet mask. The default value is 255.255.255.0
Default
Gateway
For DHCP users, select “From DHCP” to get default gateway
from your DHCP server or “User-Defined” to enter a gateway
manually. For static IP users, the default value is blank.
Primary DNS
Address
For static IP users, the default value is blank.
Secondary
DNS Address
For static IP users, the default value is blank.
DHCP Client
IP Address
When “DHCP Client” is selected this value cannot be modified.
Subnet Mask
When “DHCP Client” is selected this value cannot be modified.
Default
Gateway
Select “From DHCP” or select “User-Defined” and enter a
default gateway.
Primary DNS
Address
Select “From DHCP” or select “User-Defined” and enter a
primary DNS address.
Secondary
DNS Address
Select “From DHCP” or select “User-Defined” and enter a
secondary DNS address.