User Manual

If you changed the AP Controller’s IP address, or if your

gateway/router uses a DHCP server, ensure you enter the correct IP

address. Refer to your gateway/router’s settings.

If a DHCP server is used in the network, it is advised to use your

DHCP server’s settings to assign the AP Controller a static IP

address.

3. Enter the username & password to login. The default username &

password are admin & 1234.

Logout:

To logout from Edimax NMS, click “Logout” in the top right corner:

Restart:

You can restart your AP Controller or any Managed AP using Edimax NMS. To

restart your AP Controller go to Local Settings  Advanced  Reboot and

click “Reboot”.

To restart Managed APs click the Restart icon for the specified AP on the

Dashboard: