Quick Installation Guide

18
IV-6. Changing Date and Time
1. Go to “Management”.
2. Tap “Date and Time”.
3. Set the correct time and time zone for your AP using the drop down
menus. The AP also supports NTP (Network Time Protocol).
Alternatively, you can enter the host name or IP address of a time
server. Click “Apply” when you are finished.
In our recomandations, please enable NTP to acquire time from the
NTP server.
Furthermore, you can use the “Acquire Current Time from Your PC”
button if you wish to set the AP to the same time as your PC.
Congrats! The basic settings of your AP are now configured and your AP is up
and running!