Instructions

47
WDS settings can be configured as shown below:
2.4GHz
WDS
Functionality
Select “WDS with AP” to use WDS with AP or “WDS Dedicated
Mode” to use WDS and also block communication with regular
wireless clients. When WDS is used, each AP should be
configured with corresponding MAC addresses, wireless
channel and wireless encryption method.
Local MAC
Address
Displays the MAC address of your AP.
WDS Peer Settings
WDS #
Enter the MAC address for up to four other WDS devices you
wish to connect.
WDS VLAN
VLAN Mode
Specify the WDS VLAN mode to “Untagged Port” or “Tagged
Port”.
VLAN ID
Specify the WDS VLAN ID when “Untagged Port” is selected
above.
WDS Encryption method
Encryption
Select whether to use “None” or “AES” encryption and enter a
pre-shared key for AES consisting of 8-63 alphanumeric
characters.