Instructions

135
Radio Group Settings
Wireless
Enable or disable the AP group’s 2.4GHz or 5GHz wireless
radio. When disabled, no SSIDs on that frequency will be
active.
Band
Select the wireless standard used for the AP group.
Combinations of 802.11b, 802.11g, 802.11n & 802.11ac can
be selected.
Auto Pilot
Enable/disable auto channel selection. Auto channel selection
will automatically set the wireless channel for the AP group’s
2.4GHz or 5GHz frequency based on availability and potential
interference. When disabled, select a channel manually.
Auto Pilot
Sensitivity
Select sensitivity of Auto Pilot.
Auto Pilot
Range
Select a range from which the auto channel setting (above)
will choose a channel.
Auto Pilot
Interval
Specify a frequency for how often the auto channel setting
will check/reassign the wireless channel. Check/uncheck the
“Change channel even if clients are connected” box according
to your preference.
Channel
When Auto Pilot is disabled, select a channel (1-11) manually.
Channel
Bandwidth
Set the channel bandwidth or use Auto (automatically select
based on interference level).
BSS
BasicRateSet
Set a Basic Service Set (BSS) rate: this is a series of rates to
control communication frames for wireless clients.
These settings are for experienced users only. Please do not change any of the
values on this page unless you are already familiar with these functions.
Changing these settings can adversely affect the performance of
your APs.