IEEE 802.11n Draft2. 0 Wireless LAN Broadband Router Quick Installation Guide(Q.I.G.) Version 1.
Multi-Languages QIG on the CD =============================== Český: Českého průvodce rychlou instalací naleznete na přiloženém CD s ovladači Deutsch: Finden Sie bitte das deutsche S.A.L. beiliegend in der Treiber CD Español: Incluido en el CD el G.R.I. en Español. Français: Veuillez trouver l’français G.I.R ci-joint dans le CD Italiano: Incluso nel CD il Q.I.G. in Italiano. Magyar: A magyar telepítési útmutató megtalálható a mellékelt CD-n Nederlands: De nederlandse Q.I.G.
Copyright© by Edimax Technology Co, LTD. all rights reserved.
English Version.
10/100M Flashing WAN activity (transferring data) WAN On WAN port is connected Off WAN port is not connected LNK/ACT Flashing WAN activity (transferring data) LAN On LAN port is running at 100Mbps 10/100M Off LAN port is running at 10Mbps LAN On LAN port is connected Off LAN port is not connected Flashing LAN activity (transferring data) LNK/ACT 1-3 Back Panel Antenna C Item Name Description Antenna 3dBi detachable Antenna 3
Power Power connector, connects to power adapter Reset / WPS Reset the router to factory default settings (clear all settings) or start WPS function. Press this button and hold for 20 seconds to clear all settings, and press this button for less than 20 seconds to start WPS function. 1-4 Local Area Network (LAN) ports 1 to 4 WAN Wide Area Network (WAN / Internet) port BR-6504N supports WPS function . If your wireless adapter supports the function too.
3. Check to make sure the router’s LINK LED is lit; to confirm the cable connections are made correctly.
Step2 : PC LAN IP Configuration 1. Configure the PC LAN setting to automatically obtain an IP address from the router by following below steps. z Click “Start” in the task bar then select the “Control Panel” to open it. z Click “Switch to Classic View” on the left top to see more setting icon… z Find an icon “Network Connection” then Double-Click to open the network connection setting.
z You will see an icon “Local Area Connection”, click the icon then Right-Click the mouse to open the sub-menu and select the “Properties” for setting the IP.
z z Select the “Internet Protocol (TCP/IP)” then click the “Properties” Ensure the parameter marked in blue are checked in “Obtain an IP address automatically” and “Obtain DNS server address automatically” then press “OK” to close. 2. Power on sequence for the networking devices and PC. z Firstly, power off the modem followed by router and PC. z Second, power on the modem. z Third power on the router followed by PC for next step.
Step 3 : Router Configuration – PPPoE Note: Please do not run the PPPoE software; otherwise the Internet connection for the router may fail. 1. Enter the router’s default IP address: “192.168.2.1” into your PC’s web browser and press “enter”. 2. The login screen below will appear. Enter the “User Name” and “Password” and click “OK” to login. The default User name is “admin” and the Password is “1234”, Note: It’s highly recommended to change and save Router's log-in settings in another location.
3. The main page will appear, click “Quick Setup” Following example is for “PPPoE” WAN setting. 4. Select ‘(GMT) Greenwich Mean Time: (your country or city) then Click “Next” button. 5.
6. Enter the “User Name” and “Password” that ISP provided and leave the others. (The “Service Name” can be blank) and click “OK” to save the setting then reboot the router 7. After reboot, your router is now ready for Internet connection.
Router Configuration - Cable Modem 1. The following example is for U.K. Click on “Quick Setup”. 2. Select ‘(GMT) Greenwich Mean Time : “London”. Click “Next” button.
3. Select “Cable Modem”, the system will move into next step 4. Enter ”Host Name” and “MAC Address”. (The “Host Name” can be blank) The MAC Address is provided by ISP (e.g. NTL) or click “Clone Mac Address” button if you’re using the computer’s MAC Address. Confirm with your ISP about MAC Address used, Click “OK” button to save the settings then reboot the router. 5. After reboot, your router is now ready for Internet connection.
3 Advanced Setup 3-1 Change management password Default password of BR-6504N is 1234, and it’s displayed on the login prompt when accessed from web browser. There’s a security risk if you don’t change the default password, since everyone can see it. This is very important when you have wireless function enabled.
Please click ‘Tool’ located at the upper-right corner of web management interface, then click ‘Configuration Tools’ on the left of web management interface, then the following message will be displayed on your web browser: Here are descriptions of every buttons: Backup Settings : Press ‘Save...’ button, and you’ll be prompted to download the configuration as a file, default filename is ‘default.bin’, you can please save it as another filename for different versions, and keep it in a safe place.
router, even fix the bugs of this router. To upgrade firmware, please follow the following instructions: Please click ‘Tool’ located at the upper-right corner of web management interface, then click ‘Firmware Upgrade’ on the left of web management interface, then the following message will be displayed on your web browser: Please click ‘Next’, and the following message will be displayed: Click ‘Browse’ button first, you’ll be prompted to provide the filename of firmware upgrade file.
upgrade procedure automatically. The procedure may take several minutes, please be patient. NOTE: Never interrupt the upgrade procedure by closing the web browser or physically disconnect your computer from router. If the firmware you uploaded is corrupt, the firmware upgrade will fail, and you may have to return this router to the dealer of purchase to ask for help. (Warranty voids if you interrupted the upgrade procedure).
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment.
