User manual

65


ItemName Description
EnableStaticRouting Checkthisboxtoenablethefunction.
DestinationLANIP InputthedestinationLANIPhere.
SubnetMask Inputthesubnetmaskofthedestinationnetwork
here.
DefaultGateway InputthegatewayIPaddressthatleadstothe
specifiednetwork.
HopCount Inputthehopcount(thedistancebetweenthe
destinationnetworkandthisbroadbandrouter)here.
Interface Selecttheinterfacethatleadstothedestination
network(LANorWAN).
Add Click“Add”toaddthesettingstothetable.
Reset Click“Reset”toclearallthesettings.

Click“Apply”tosavethechanges,orclick“Cancel”todiscardthechanges.Afteryouhave
clicked“Apply”,youwillseethefollowingmessage:



Click“Apply”tosavethechangesandrestartthebroadbandrouter.Ittakesabout60
secondsforthebroadbandroutertorestart.Click“Continue”toconfigureothersettings.

3‐7Firewall

Youcanconfigurethefirewallfunctionsunder“Firewall”toprotectyournetworkand
computer.
