User manual

60
localnetworkhere.
ComputerName Computernamesfoundinthelocalnetworkarelisted
here.Youcanselectacomputernameandclickthe
“<<”buttontoaddtheselectedcomputer’sprivateIP
addresstothe“ClientPCIPAddress”field.
Add Click“Add”toaddthesettingstotheDMZtable.
Reset Click“Reset”toclearthesettings.

NOTE:EachpublicIPaddresscanbemappedtooneclientPCIPaddressonly.

AllDMZentriesaredisplayedin“CurrentDMZTable”:



Click“Apply”tosavethechanges,orclick“Cancel”todiscardthechanges.Afteryouhave
clicked“Apply”,youwillseethefollowingmessage:



Click“Apply”tosavethechangesandrestartthebroadbandrouter.Ittakesabout60
secondsforthebroadbandroutertorestart.Click“Continue”toconfigureothersettings.

3‐6NAT

ThisbroadbandroutersupportsfourtypesofNATfunctions.Seethefollowingfor
instructions.

3‐6‐1VirtualServer


ThisfunctionallowsyoutoredirectaportofanInternetIPaddresstoaspecifiedportofa
privateIPaddress,soyoucansetupanInternetserviceonthecompute rinthelocal
networkwithoutexposingittotheInternetdire ctly.
