User manual

47
ItemName Description
Band Selectfromoneofthefollowingoptions:

2.4GHz(B):Allows802.11bwirelessnetworkclients
toconnecttothisrouter.

2.4GHz(N):Allows802.11nwirelessnetworkclients
toconnecttothisrouter.

2.4GHz(B+G):Allows802.11band802. 11g wireless
networkclientstoconnecttothisrouter.

2.4GHz(G):Allows802.11gwireless
networkclients
toconnecttothisrouter.

2.4GHz(B+G+N):Allows802.11b,802.11g,and
802.11nwirelessclientstoconnecttothisrouter
(recommended).
ESSID Thisisthenameofyourrouter.Youcantypeany
alphanumericalcharacterhere (maximum32
characters).
ChannelNumber Selectachannelfromthedropdownmenu.Allaccess
pointsmustusethesamechannel(1to13).
AssociatedClients Click“ShowActiveClients”forthelistofall
connectedwirelessclients.Click“Refresh”inthe
newwindowtorenewthelist,andclick“Close”to
closethewindow.

Note:Ifyouhaveapop‐upblockerinstalled,you
mayhavetodisableit,orsetittoallow
thepop‐up
windowtoshowup.
RootAPSSID InputtheSSIDofthewirelessaccesspointwith
whichyouwishtoconnect. 
SiteSurvey Click“SelectSiteSurvey”andapop‐upwindowwill
appear.Allreachablewirelessaccesspointswillbe
showninthewindow.Selectawirelessaccesspoint
fromthelist,andclick“Done”toestablisha 
connection.Clicking“Refresh”willrenewthelist.
WirelessModule Select“Enable”toturnonthe2.4GHzwireless
signalandselect“Disable”toturnitoff.
