BR-6478Gn Quick Installation Guide 03-2012 / v1.
COPYRIGHT Copyright © Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
PRODUCT INTRODUCTION Package Contents Before you start using this router, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s): z z z z z z z z z Broadband router (1 pcs) Quick installation guide (1 pcs) 3dBi antenna (2 pcs) CD with multi‐language QIG and user manual (1 pcs) 12V DC power adapter (1 pcs) Ethernet cable (1 pcs) Power adapter (1 pcs) Vertical stand (1 pcs) Accessory kit (1 pcs) Front Panel LED Name PWR Wireless WAN LAN (1‐4) Light
Back Panel Item Name Description Antenna connector(s) Connects to the supplied antenna(s) Wi‐Fi on/off switch Switches on/off the Wi‐Fi signal WPS/Reset Button Resets the router to factory default settings or starts WPS function (press this button and hold for 20 seconds to clear all settings or press this button for 2‐5 seconds to activate WPS function) 1‐4 (LAN Ports) Connects to computer or other web devices WAN Port Connects to cable/xDSL modems Power Connector Connects to the supplied pow
Note: You can click “Connect to the Internet manually” to log in the user interface. Input “admin” in the “Username” field and “1234” in the “Password” field when prompted. Note: Your computer or iPhone can also use iQ Setup with a Wi‐Fi connection. Please make sure you have connected to the correct Wi‐Fi network. The router’s default SSID is “Edimax”.
If you click “Yes (recommended)”, you will be asked to enter an SSID and a password (at least 8 digits). Note: Please remember your password or you will not be able to use the Wi‐Fi connection. PPPoE If your Internet connection type is PPPoE, you will see the following: Please enter the username and password provided by your ISP (usernames and passwords are case‐sensitive). Click “Next” and the following will appear: Note: For security reasons, Edimax suggests that you set up the wireless security.
Note: Please remember your password or you will not be able to use the Wi‐Fi connection. If your PPPoE connection is invalid, you will see the following: Click “Try it again” and the wizard will try to connect to the Internet again with the current information. Clicking “Re‐enter” will take you to the previous page and let you enter the username and password again. If your connection type is none of the above or if the auto‐detection has failed, you will see the following page.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: French: Czechian: Polish: Romanian: Russian: Magyar: Türkçe: Ukrainian: Slovakian: German: Spanish: Italian: Dutch: Portugese: Norwegian: Swedish: Danish: Finnish: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2009/125/EC.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directive (73/23/EEC). Equipment: N300 Wireless Gigabit Broadband iQ Router Model No.: BR‐6478Gn The following European standards for essential requirements have been followed: Spectrum: ETSI EN 300 328 V1.7.1 (2006‐10) EMC: EN 301 489‐1 V1.8.1 (2008‐04); EN 301 489‐17 V2.1.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine‐readable copy of the corresponding source code.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.
13
