Quick Installation Guide

10
2. Je ne parviens pas à ouvrir l'interface web de configuration.
a. Make sure the connection of WAN and LAN port(s) is correct.
b. Ensure that your Ethernet cable with internet connectivity is plugged into the WAN port of the
router rather than a LAN port.
c. Ensure that your wireless device is connected to the LAN port(s) of the router.
d. Make sure you enter the correct IP address (192.168.2.1) to log in.
e. Make sure the IP address of your computer is configured as Obtain an IP address automatically and
Obtain DNS server address automatically.
f. Use another web browser to log in again.
g. Reset the router to factory default settings and try again.
3. How do I reset my device to factory default settings?
a. Pour réinitialiser l'appareil avec ses paramètres d'usine par défaut, maintenez enfoncée la touche
WPS/Reset pendant 10 secondes, jusqu'à ce que le voyant d'alimentation commence à clignoter.
Patientez quelques minutes que l'appareil redémarre. Tous les paramètres sont réinitialisés lorsque
l'appareil redémarre.
4. J'ai oublié mon mot de passe.
a. Réinitialisez le routeur avec ses paramètres d'usine par défaut et utilisez le nom d'utilisateur admin
et le mot de passe 1234 par défaut. Default settings are displayed on the product label on the back
of the device, as shown above.
5. If An IP address conflict message appears after the computer is connected to the
router, what should I do?
a. Ensure that there is no other DHCP server in your LAN or the other DHCP server is disabled.
b. Make sure the IP address of your router is not used by another device in your LAN. The default IP
address of the router is 192.168.2.1.
c. Ensure that the static IP address assigned to the computer in your LAN is not used by other devices.